The Linksys extender login page gives you access to the web-based setting wizard online. You cannot just change settings but enable and disable several device-inherent features conveniently. If you are looking to access the login page but are facing issues getting there, this blog will walk you through the entire process. Additionally, you’ll learn steps to resolve any issues that might occur during the login.
Default Linksys extender login settings
The default device settings can always be obtained from the Linksys extender’s product label. Information related to the username, password, default gateway address, and more can be located on the same. If you don’t find the same there, you can check the extender product manual that came with the device.
Here are some things and information you’ll need to keep handy before you start:
Default web address: http://extender.linksys.com
IP address: 192.168.1.1
Admin username: admin
Password: admin or you can leave the field blank.
Preparing for the extender login
In order to log in to the Linksys extender, you’ll need to connect your computer or smartphone to its local network. Now, you can do that in two ways:
Wired Connection
- Plug your extender into a power outlet and turn on the power supply. Prefer a location that’s near the main router. This will help you during the network configuration later on.
- Use an ethernet cable and connect one end of it to the ethernet port on your computer while the other end to one of the LAN ports on your extender device.
- The computer will detect the wireless network and accordingly display a notification upon successful connection.
Wireless Connection
- Plug your extender into a power outlet and turn on the power supply. Prefer a location that’s near the main router.
- Turn on your computer/smartphone and enable WiFi by visiting the WiFi settings page.
- In the available networks section, look for the extender’s network SSID and select the same once it becomes visible.
- Click on the Connect button next to the name. You’ll now see the connection status on your computer/smartphone.
Accessing the Linksys extender login page
- Open a web browser on your computer/smartphone. You can use any of the compatible web browsers including Google Chrome, Microsoft Edge, Internet Explorer, Mozilla Firefox, or Apple Safari.
- In the address bar, type the default web address http://192.168.1.1 or http://extender.linksys.com and press Enter.
- You will now be redirected to the Linksys extender login page and fields like username and password will become visible.
- Type the default credentials in the fields available and then click/tap on the Login button.
The login wizard will now validate the credentials and redirect you to the Linksys extender setup wizard.
Resolving issues with login page access
If you are having issues accessing the extender’s login page, it is likely to be an issue with the connectivity or the URL you are using. You can try checking these details and ensure that everything is in order. Here are some steps you can follow:
- Check if the Linksys extender is plugged in securely to the power outlet. If you suspect the issue is with the power supply, you can use a voltage regulator or change the power outlet you are using.
- Ensure there is no interference from other wireless devices like cordless phones and appliances like microwave ovens, etc. If so, relocate them to a different location and try connecting to the extender network again.
- If you are sitting too far from the extender or the extender is out of the good signal area, move closer. Avoid places where obstructions due to walls, or physical objects are there. Try to establish a line of sight communication between devices.
- Check if the web browser that you’re using is updated. In case an update is pending, download and install the same. You may then proceed with the login page access again.
- Check the connections that you have made between devices. Inspect the power cable, ethernet cable that you are using to connect the devices. Also, check if they are securely attached to the LAN ports.
- Use the correct web address to access the Linksys extender login page. The correct web address you can use is http://extender.linksys.com and the IP address is 192.168.1.1. Type these addresses in the address bar and not in the search bar.