The Linksys Hydra Pro 6 Dual-Band Mesh WiFi 6 Router AX5400 is the latest networking device by Linksys. This router is integrated with the latest WiFi 6 technology with numerous advanced features. The Linksys Hydra router provides a high-speed internet connection with better network coverage than any other Mesh router. However, it’s still inevitable to experience issues with your Linksys router. Such as the Linksys WiFi 6 router AX5400 not working is a common problem a lot of users face.
These problems could arise due to various reasons. If you are facing the Linksys Dual-Band WiFi 6 router AX5400 not working, don’t worry. You can easily troubleshoot this issue using the correct techniques. We have designed this post to help users figure out the issue with the Linksys Hydra router. In this blog, you can also discover the methods you can use to resolve the issues.
Why is the Linksys WiFi 6 Router AX5400 Not Working?
There could be plenty of reasons for the Linksys Hydra Pro 6 dual-band mesh WiFi 6 router AX5400 not working. Some common ones are as follows:
- Insufficient power source
- Improper cable connection
- ISP issue
- Outdated firmware
- WiFi interferences
- Internal issues
These are some common reasons for the Linksys WiFi 6 router AX5400 not working. Further, we’ll discuss the troubleshooting methods for this issue.
Fixing the Linksys Dual-Band WiFi 6 Router AX5400 Not Working
Now, you know the reasons for the Linksys WiFi 6 router AX5400 not working. You must fix these issues to get the router back on track. Below are some methods you can use to troubleshoot these problems:
Check the Power Source
- The router should have a reliable power source to function properly.
- Without a power connection, the Linksys router will not work at all.
- Thus, you must plug the router into a proper power socket.
- If it already has a power source, check if it’s working.
- Otherwise, you must plug the router into another electrical outlet.
Inspect the Cable Connections
- To function effectively, the router should have a proper connection with the modem.
- If the router isn’t connected to the modem, it will have no active internet connection.
- Therefore, ensure to connect the router to your modem correctly with an Ethernet wire.
- Also, check the connection between the router and the modem and ensure it’s proper.
- Ensure the connection isn’t loose and the network cable isn’t damaged.
- If it is, you must replace the Ethernet cable with a new one.
- This should fix the Linksys Dual-Band WiFi 6 router AX5400 not working.
Reboot the Router
- You can also try rebooting the router to fix the issue.
- The reboot resolves all minor glitches and bugs with the router.
- To reboot the router, you just need to turn it off and unplug it.
- Wait for some time and let the router cool down.
- After 30 seconds or so, you can power the router back on.
- This should resolve the Linksys WiFi 6 router AX4500 not working.
Contact your ISP
- There could be an issue from your ISP’s end if you aren’t receiving any internet.
- You can simply contact your ISP and let them know of the issue you are facing.
- If the issue is from their end, they will inform you.
- Otherwise, you can proceed with the next method.
Remove the Obstructions
- Sometimes some objects could interfere with the router’s network.
- Several items do this, which causes the internet signal to weaken.
- Items such as ovens, aquariums, and radio-waves emitting devices cause this issue.
- Check if such devices are around the router.
- If there are, you must relocate the router or remove these objects.
- The ideal location for the router is in the center of an open area.
- Now the Linksys Dual-band WiFi 6 router AX5400 issue should be gone.
Move the Nodes Closer
- A common reason for the Linksys nodes not working is the distance.
- When the mesh nodes are too far from the router, they don’t work.
- Due to distance, they are unable to communicate with one another.
- Thus, you must move the Linksys nodes closer to the main router.
- The Linksys app will accurately guide you to place the nodes correctly.
Upgrade the Firmware
- You can also try updating the firmware of the router to fix the glitches.
- The outdated firmware of the router also causes the router to act up.
- That’s why you must update the firmware of the router frequently.
- To update the firmware, open the Linksys app.
- Now, from the app, go to the Menu and select the Network Administration option.
- Hereon, you can either select the Automatic Update or the Manual Update.
- In the automatic update, the router will upgrade the router automatically.
- Whereas, in the manual upgrade, you will receive a notification informing you to update.
- From here, you can update the firmware of your Linksys Mesh router.
- While the router is updating the firmware, you must not interrupt it in any way.
Reset the Linksys Hydra
- If none of these methods are working, you must reset the router.
- Resetting the router will eliminate all glitches and bugs with the router.
- To reset the router, look for the router’s reset button.
- Now, press the reset button and hold it, the LED on the top should blink.
- When the light goes off and turns red, you can release the button.
- The reset is successful and the issue with the router should be gone.
- Remember the reset restores the factory default settings.
- After the reset, you must set up the router again.
These troubleshooting ways should fix the Linksys hydra pro 6 dual-band mesh WiFi 6 router AX5400 not working. Now, the Mesh system should be working properly. If you are still facing any issues with your Linksys Hydra Mesh WiFi system, you can get in touch with our expert team right now.
FAQs
How do I set up the Linksys Hydra Pro 6 Mesh WiFi System?
To set up the Linksys Mesh WiFi system, there are two ways. You can either set them up from the Linksys app or via the web browser. For the web browser method, you require the default IP address to access the login page. Whereas, you can easily set it up using the Linksys app as well. With this method, you can create an account from the app and set up the router accurately.
How do I get my Linksys back online?
To get your Linksys Mesh WiFi system back online, you must plug it into a power source. The router requires a proper power source to function effectively. Otherwise, the router will not function at all. Thus ensuring a reliable power supply to the Linksys Hydra WiFi Mesh system. Also, ensure to connect the main Mesh router to your modem accurately.
Why is my mesh WiFi not connecting?
If your Mesh system isn’t connecting to the nodes, they could be too far. The mesh system’s nodes must be closer to the main router to form a seamless connection. Otherwise, the Linksys Mesh system will have trouble communicating with the nodes. You can also connect the nodes to the main router using an Ethernet cable.